ADIY
ADIY 1 CHANNEL 12V RELAY BOARD WITH OPTO – view 1FIG. 01

Relay Boards

ADIY 1 CHANNEL 12V RELAY BOARD WITH OPTO

12V 1-Channel Relay Module with Optocoupler by ADIY is a Bidirectional isolation type 1-Channel relay control module, according to user needs, you can choose a high or low level to control the relay pull. The module…

₹61₹100incl. GST · price as listed

In stock (as listed)

Overview

12V 1-Channel Relay Module with Optocoupler by ADIY is a Bidirectional isolation type 1-Channel relay control module, according to user needs, you can choose a high or low level to control the relay pull. The module uses a genuine high-quality power relay, high-quality subminiature package optocoupler, high power high voltage transistor, red and blue signal indicator, and layout board considered comprehensive, stable performance, and can be widely used in a variety of power control applications.

Features :1 Channel 12V Relay Module with Optocoupler#

  • Equipped with high-current relay 10A@250VAC / 10A@30VDC
  • It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc.
  • High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
  • A freewheeling diode to protect your microcontroller
  • Input Signal Pin connected to Burg stick for easy accessibility
  • LED status indicators to indicate the relay ON/OFF status
  • Mounting holes provided
  • Signal input with a high-level signal, the common and often start conduction;
  • The relay can directly control all kinds of equipment and load;
  • One often opened a normally closed contact;
  • Blue KF301 terminal line more convenient.

Specification: 1 Channel 12V Relay Module with Optocoupler#

  • Working voltage: DC12V,
  • Working Current: 12V Version
  • the working state of 50mA (Relay without pull/release action, less than 15mA). ;
  • The relay high-level pull-in, the module contains current-limiting resistance, a high level can be DC +, microcontroller I / O port can be set high;
  • Fault-tolerant design, even if the control line is broken, the relay will not move;
  • Power indicator (red), 1 relay status indicator (blue)
  • User-friendly interface design, all interfaces can be directly connected through the terminal leads, very convenient
  • With four fixing bolt holes, easy to install

Module interface:1 Channel 12V Relay Module with Optocoupler

  • DC +: positive DC power supply;
  • DC-: DC negative supply;
  • VERF: photoelectric isolation control terminal reference ground, this signal should be connected to the user control panel power supply negative;
  • CH1: relay control interface, the high level (relative to VERF) corresponding relay pull;

NOTE:

An isolated relay module is to adapt to the electromagnetic environment is relatively harsh or high signal requirements of the occasion, if you want to achieve full isolation effect, the user control panel power (that is connected to the VERF reference power) and the relay module power supply (DC + / DC-) should be separated, if the two power supply ground, it is not completely isolated effect.

Relay output:

  • NO: relay normally open interface.
  • COM: relay common interface.
  • NC: normally closed relay interface.

Package Includes:

1 x 1 Channel 12V Relay Module by ADIY

Features

  • Equipped with high-current relay 10A@250VAC / 10A@30VDC
  • It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc.
  • High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
  • A freewheeling diode to protect your microcontroller
  • Input Signal Pin connected to Burg stick for easy accessibility
  • LED status indicators to indicate the relay ON/OFF status
  • Mounting holes provided
  • Signal input with a high-level signal, the common and often start conduction;
  • The relay can directly control all kinds of equipment and load;
  • One often opened a normally closed contact;
  • Blue KF301 terminal line more convenient.
  • the working state of 50mA (Relay without pull/release action, less than 15mA). ;
  • The relay high-level pull-in, the module contains current-limiting resistance, a high level can be DC +, microcontroller I / O port can be set high;
  • Fault-tolerant design, even if the control line is broken, the relay will not move;
  • Power indicator (red), 1 relay status indicator (blue)
  • User-friendly interface design, all interfaces can be directly connected through the terminal leads, very convenient
  • With four fixing bolt holes, easy to install

Technical specifications

Specifications for ADIY 1 CHANNEL 12V RELAY BOARD WITH OPTO
Working voltageDC12V,
Working Current12V Version
DC +positive DC power supply;
DC-DC negative supply;
VERFphotoelectric isolation control terminal reference ground, this signal should be connected to the user control panel power supply negative;
CH1relay control interface, the high level (relative to VERF) corresponding relay pull;
NOrelay normally open interface.
COMrelay common interface.
NCnormally closed relay interface.

Specifications are taken from the product listing. See the datasheet for full electrical details.

Datasheets & downloads

  • Relay Boards

    8 Channel Relay Board 12V

    8 Channel Relay Board 12V – This 8 Channel 12V Relay Module with Optocoupler meets the safety standard as control areas and load areas have the isolation groove. Optical coupling isolation module. The triggering of the…

    ₹301.89

  • ADIY 1 CHANNEL 5V RELAY BOARD WITH OPTO – view 1

    Relay Boards

    ADIY 1 CHANNEL 5V RELAY BOARD WITH OPTO

    5 V Relay Module with 1 Channel is designed for switching only a single high-powered device from your Arduino. This 1 channel 5V 10A relay control board module with optocoupler modules is compliant with international…

    ₹61

    Datasheet
  • ADIY 1 CHANNEL 5V RELAY BOARD WITHOUT OPTO – view 1

    Relay Boards

    ADIY 1 CHANNEL 5V RELAY BOARD WITHOUT OPTO

    Relay Module 5v 1 Channel SPDT (Single-Pole Double-Throw) high-level trigger AC power relay board is designed for easy integration with microcontrollers, allowing direct control of up to 10A at 250 VAC. The relay’s…

    ₹47

    Datasheet
  • ADIY 2 CHANNEL 12V RELAY BOARD – view 1

    Relay Boards

    ADIY 2 CHANNEL 12V RELAY BOARD

    2 Channel 12V Relay Module with Optocoupler by ADIY is an interface board and can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on. With digital outputs to control…

    ₹87

    Datasheet