ADIY
4-channel-I2C-safe-Bi-directional-Logic-Level-Converter-2N7002FIG. 01

Converter Boards

ADIY Bi-Directional Logic Level Module

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flashcards, and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V…

₹26₹60incl. GST · price as listed

In stock (as listed)

Overview

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flashcards, and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.

There are some other handy level shifters available in the market, from the DIP 74LVC245 to the fancy bi-directional TXB0108. However, neither of these are happy to work with I2C, which uses a funky pull-up system to transfer data back and forth. This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP’s app note.

This breakout has 4 2N7002 FETs with 10K pull-ups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K’s do make the interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer.

While we designed it for use with I2C, this works as well for TTL Serial, slow <2MHz SPI, and any other digital interface both unidirectional and bidirectional. Comes with a fully assembled, and tested PCB with 4 full bidirectional converter lines as well as 2 pieces of 6-pin header you can solder on to plug into a breadboard or perfboard.

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flashcards, and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.

There are some other handy level shifters available in the market, from the DIP 74LVC245 to the fancy bi-directional TXB0108. However, neither of these are happy to work with I2C, which uses a funky pull-up system to transfer data back and forth. This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP’s app note.

This breakout has 4 2N7002 FETs with 10K pull-ups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K’s do make the interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer.

While we designed it for use with I2C, this works as well for TTL Serial, slow <2MHz SPI, and any other digital interface both unidirectional and bidirectional. Comes with a fully assembled, and tested PCB with 4 full bidirectional converter lines as well as 2 pieces of 6-pin header you can solder on to plug into a breadboard or perfboard.

Features and Specifications#

  • Number of Channels 4
  • Voltage on Lv Side 1.8V-5V
  • Voltage on Hv Side 2.8V-6V
  • Power 2.8V – 6V
  • Length (mm) 20
  • Width (mm) 16
  • Height (mm) 3
  • Weight (gm) 2

Package Includes:#

  • 1 x I2C Logic Level Converter 4 Channel

Resources#

  1. Usage Guide
  2. The NXP app note explaining how it works
  3. BSS138 Datasheet

Features

  • Number of Channels 4
  • Voltage on Lv Side 1.8V-5V
  • Voltage on Hv Side 2.8V-6V
  • Power 2.8V – 6V
  • Length (mm) 20
  • Width (mm) 16
  • Height (mm) 3
  • Weight (gm) 2
  • 1 x I2C Logic Level Converter 4 Channel
  • Usage Guide
  • The NXP app note explaining how it works
  • BSS138 Datasheet

Datasheets & downloads

  • USB to UART/RS232 Converter – CP2102 – view 1

    Converter Boards

    USB to UART/RS232 Converter – CP2102

    Installs virtual Serial COM Port on your PC through USB so any software can connect to your end device having UART/RS232 port. The UART port is exposed via a 4 pin 0.1″ standard vertical header, and the RS232 port is…

    ₹306

  • Relay Boards

    8 Channel Relay Board 12V

    8 Channel Relay Board 12V – This 8 Channel 12V Relay Module with Optocoupler meets the safety standard as control areas and load areas have the isolation groove. Optical coupling isolation module. The triggering of the…

    ₹301.89

  • ADIY 10K Potentiometer Module – view 1

    Interface Modules

    ADIY 10K Potentiometer Module

    An adjustable potentiometer, 10K Potentiometer Module can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the centre pin will have a…

    ₹48

    Datasheet
  • ADIY 6 CHANNEL 12V RELAY BOARD – view 1

    Relay Boards

    ADIY 6 CHANNEL 12V RELAY BOARD

    12V Relay Module 6 Channel with Optocoupler by Adiy meets the safety standard as control areas and load areas have the isolation groove. Optical coupling isolation module. The advanced FR4 double circuit board features…

    ₹304

    Datasheet