ADIY
Vibration Sensor Module SW180PFIG. 01

vibration sensor

SW180P Vibration Sensor Module – ADIY

ADIY SW180P Vibration Sensor Module is Normally open vibration sensor module is for a variety of vibration trigger functions, reported theft alarm, smart car, electronic building blocks, and so on. When the product does…

₹55₹90incl. GST · price as listed

In stock (as listed)

Overview

ADIY SW180P Vibration Sensor Module is Normally open vibration sensor module is for a variety of vibration trigger functions, reported theft alarm, smart car, electronic building blocks, and so on. When the product does not shake, the vibration switch is held in off state, the output is high and the DO light does not shine and when the product vibrates, the vibration switch goes into momentary conduction mode, the output end of the output goes low and the DO indicator light-up.

DO-Output can be directly connected to the microcontroller through the microcontroller to detect high and low levels, thus to detect whether there is a vibration of the environment, play an alarming role.

ADIY SW180P Vibration Sensor Module is Normally open vibration sensor module is for a variety of vibration trigger functions, reported theft alarm, smart car, electronic building blocks, and so on. When the product does not shake, the vibration switch is held in off state, the output is high and the DO light does not shine and when the product vibrates, the vibration switch goes into momentary conduction mode, the output end of the output goes low and the DO indicator light-up.

DO-Output can be directly connected to the microcontroller through the microcontroller to detect high and low levels, thus to detect whether there is a vibration of the environment, play an alarming role.

Connection:#

  • VCC: Connect the positive power supply
  • GND: Connect to the negative power supply
  • DO: The digital signal output

Features:#

  • Using the company’s high-sensitivity vibration switch, the default with the SW-18015P vibration sensor.
  • The comparator output, the signal clean, good waveform, driving ability, more than 15mA
  • With a fixed bolt hole, easy to install.
  • The use of a wide voltage LM393 comparator.

Features

  • Using the company’s high-sensitivity vibration switch, the default with the SW-18015P vibration sensor.
  • The comparator output, the signal clean, good waveform, driving ability, more than 15mA
  • With a fixed bolt hole, easy to install.
  • The use of a wide voltage LM393 comparator.

Technical specifications

Specifications for SW180P Vibration Sensor Module – ADIY
VCCConnect the positive power supply
GNDConnect to the negative power supply
DOThe digital signal output

Specifications are taken from the product listing. See the datasheet for full electrical details.

Pin configuration

Vibration Sensor SW1801P Module LM393 Pin diagram

Datasheets & downloads

  • SW420 Tilt Sensor Module

    vibration sensor

    SW420 Vibration Sensor Module – ADIY

    SW 420 vibration sensor module by ADIY features a vibration sensor, an adjustable trim pot, and a comparator chip to give an adjustable digital output based on the amount of vibration. The multiturn trim pot can be…

    ₹39

    Datasheet
  • Tilt Sensor Module SW520D

    vibration sensor

    SW520D Tilt Sensor Module – ADIY

    TILT SENSOR MODULE with SW520D By ADIY is a device used for knowing the planar movement. Although they are available in various types their basic function remains the same. Their function is to detect the plane shift…

    ₹41

    Datasheet